Showing Tag: "soldering rings" (Show all posts)

Making an Amethyst Ring

Posted by Robyn Anderson on Thursday, April 7, 2016, In : Rings 
I thought I would post some progress shots as I make another amethyst ring. You can see here my faceted amethyst cabochon, 20g silver sheet, gallery wire and 1.6mm silver wire oval ring. 



I prepare the gallery wire and oval ring by sanding the bottoms flat on 400 grit emery paper. Everything then gets assembled. I find it easier soldering everything at once. Occasionally I need to go back and add some more solder if there are gaps anywhere around the edge of the oval wire ring. You will notice...
Continue reading ...
 

On My Bench Today

Posted by Robyn Anderson on Wednesday, July 29, 2015, In : Rings 
I have been thinking for a while about making wide ring bands by layering rings with different texture together so today I tried a few ways of preparing the rings for soldering. I had in mind holding the rings together with binding wire and adding the solder chips between the rings on the inside of the ring to solder. I couldn't seem to get that to work though. The rings wouldn't stay securely in place despite tightening the binding wire as much as possible.What I finally did was place tiny h...
Continue reading ...